SrMouraSilva · Plugin manual

Hept7 Switch

Seven scenes. Eight outputs. One stomp.

A CV loop switcher with a display on the pedal and a full-screen, touch-friendly settings page, for MOD Dwarf, MOD Duo X and MOD Duo

7 presets8 CV outputsMIDI outTouch settings page

Hept7 Switch
User manual · November 2026 editionv1.0.37

Hept7 Switch turns one footswitch press into eight CV signals at once. You choose, for each of its 7 presets, which of its 8 CV outputs are on (10 V) or off (0 V), and then change between presets with a footswitch, a knob or the screen. Route the CV outputs to the on/off (or any CV-addressable) parameters of your plugins and a single press can turn a whole scene on.

It is the bigger sibling of Tetr4 Switch, and it has two things of its own: a display that shows the preset (and announces every change of it), and a full-screen settings page made for touch screens. Besides CV it has a MIDI out: each change of preset sends a MIDI control change per output (section 7).

Hept7 Switch on the pedalboard
Hept7 Switch on the pedalboard
Hept7 Switch in use: the buttons select the preset and the display announces it, the squares turn the outputs on and off, the name is edited right there
Hept7 Switch in use: the buttons select the preset and the display announces it, the squares turn the outputs on and off, the name is edited right there
01

Quick start

This example gives you two scenes: a clean sound and a lead sound with a drive and a delay. You need a pedalboard with any drive plugin and any delay plugin in the chain.

  1. Add Hept7 Switch to your pedalboard. You can find it among the Utility plugins. Put it anywhere; it has no audio connections.
  2. Click on "Manage CV ports" on the Pedalboard actions bar (top of Constructor window on the MOD WebGUI) and check the boxes that appear next to the outputs of the Hept7 Switch.
  3. Give your drive and your delay an on/off CV input. Click the gear icon of the drive, open the addressing for its On/Off (bypass) parameter and choose CV; select CV Output 1. Do the same for the delay with CV Output 2.
  4. Set the scenes. Click Edit scenes. In the factory setting preset N turns on output N only, so turn off the lit cell of the row of preset 1 (the clean scene: everything off) and turn on output 1 in the row of preset 2 (the lead scene: drive and delay).
  5. Click the buttons 1 and 2 of the plugin. The drive and the delay turn on and off together, and the display announces the preset in its colour.
  6. Put it under your feet. Assign Preset 1 and Preset 2 to two device footswitches. Their LEDs light up in the colour of the preset while it is active. On the settings page (section 4) the small button at the end of each preset's row, after Cycle, does this in one tap.

    Step 6: the small button at the end of the row of Preset 1 and Preset 2 opens the assignment
    Step 6: the small button at the end of the row of Preset 1 and Preset 2 opens the assignment

The one trick to learn

Plan your outputs before your presets. Each output is one "loop": a group of plugins that always switch on and off together. Decide those eight groups first. After that, each preset is just a matter of choosing which loops are on. Plugins that are always on, like your amp and cab, don't get a CV addressing at all.

02

The plugin on the pedalboard

The Hept7 Switch panel 1 2 3 4 5 6
Preset 3 is active (Crunch), with outputs 2 and 8 on.
Item What it does
1Display, big number and name The active preset. The name is editable: click it and type (up to 15 characters). It is also the text the device screen pop-up shows (see section 6).
2Display, eight squares The CV outputs that are on in the active preset. They are buttons: click one to turn that output on or off in the active preset, without opening the settings page (the other presets are edited on the settings page).
3Seven buttons Select the preset. The button of the active preset lights up in its colour. There are seven because the device footswitch LEDs have seven colours (red, yellow, green, cyan, blue, magenta, white): each preset has its own, here and on the device. A button with its number crossed out is a preset left out of the cycle of the buttons Current preset, Next preset and Previous preset (section 5); the button still selects it.
4Edit scenes Opens the settings page (section 4). The gear icon above the plugin opens it too.
5Eight CV jacks CV Output 1–8, on the back plate at the right, in two columns (1–4 and 5–8).
6MIDI out (jack) The ninth jack, under the second column. It sends a MIDI control change for each output when the preset changes (section 7).

The display announces every change of preset

Whenever the preset changes — from a footswitch, a knob, the buttons or a MIDI controller — the whole display takes the colour of the new preset for a moment, showing its number and name big:

The display announcing preset 3
The display announcing preset 3

This works on every device, including the MOD Duo, which has no screen for plugin pop-ups: it is how you see which preset a footswitch has just selected.

03

Interactive manual

Here the plugin is the real one: the same interface, the same script, running inside the manual. Press Open the interactive manual under the picture to open it full screen (Esc or Close brings you back). Nothing you do is saved or sent anywhere, and Reset puts it back the way it starts.

  • Explore: tap any part of the plugin to read what it is for, or pick it from the list under the picture. Show areas outlines everything that can be tapped. Use the buttons at the top to switch between the plugin on the pedalboard and its settings page.
  • Guided tours: step-by-step walkthroughs of the common tasks. A finger shows where to tap. Go forward and back with Next and Back: every step says what is happening and shows it in the plugin.
04

The settings page

Click Edit scenes (or the gear icon) to open a page that takes the whole screen and is made for touch: big cells, nothing smaller than a fingertip.

The settings page
The settings page
  • Scenes: one row per preset. The numbered button on the left makes that preset the active one, and the small button at the end of the row (Assign, after Cycle) assigns the preset to a footswitch, a knob or another control of your device (it fills in once it is assigned); the field next to it is its name; then one cell per CV output. A lit cell means that output is on while that preset is active. The row of the active preset is highlighted, and its lit cells are the CV signals actually leaving the plugin right now.
  • Cycle: the cell before the Assign button of each row, set apart from the CV outputs. On (↻, turquoise), the preset is one of those Current preset, Next preset and Previous preset go through; off (✕), they skip it. See section 5.
  • Hardware: tiles to assign a footswitch or a device screen page to the plugin's controls (section 5), told apart by purpose: Current preset, Next preset and Previous preset (the tiles also say which preset is playing and where each button leads) and the screen pop-ups. A tile shows a check mark once it is assigned. The MOD Duo has no widgets on its screen, so there the pop-up tiles are disabled and say so.
  • MIDI out: the channel, whether to send only what changed, and the CC number of each output (section 7).
  • Saved presets: the factory presets (section 8) and your own presets.

The page never scrolls up and down. What does not fit the screen goes on another page, to the right: the arrows in the top bar (always there) and the dots between them show and change the page, and on a touch screen you can swipe sideways too. A large screen shows more on each page; a phone shows fewer presets per page (it says Scenes 2/3), and each purpose of the Hardware section gets a page of its own.

The settings page on a phone
The settings page on a phone
Going through the settings page: the matrix, a name, the cycle switch and every page with the arrows of the top bar
Going through the settings page: the matrix, a name, the cycle switch and every page with the arrows of the top bar
05

Switching presets with hardware

Assign one of the plugin's controls (the buttons and tiles of the settings page, or the usual assignment dialog) to the control you want to use:

Control Use
Preset 1–7 One footswitch per preset. Turning one on turns the others off.
Current preset One footswitch that loops through the presets: each time you let go of it, it goes to the next preset in the cycle, and after the last it goes back to the first.
Next preset A footswitch that goes to the next preset in the cycle.
Previous preset A footswitch that goes to the previous preset in the cycle.

On the settings page, tap the small button at the end of the row of the preset (or the tile of the control) and choose the control in the dialog that opens:

The small button at the end of the row of Preset 1 and Preset 2 opens the assignment
The small button at the end of the row of Preset 1 and Preset 2 opens the assignment

Going through the presets with one or two footswitches

Current preset, Next preset and Previous preset are three buttons, one footswitch each. Use Current preset to loop with one foot, or Next preset on one footswitch and Previous preset on the other (B and C on the Dwarf) to go both ways.

The tiles of Current preset, Next preset and Previous preset on the settings page
The tiles of Current preset, Next preset and Previous preset on the settings page
  • They act when you let go. The three are momentary, off while held: the preset changes when the footswitch is released, not when it is pressed. Keep that mode in the assignment dialog (it is the one they come with); in a latching mode only every other press would count.
  • They are for footswitches. MOD UI does not offer them for the B+C pair, which takes only lists. A knob can be assigned to them too, and then it works as a button (turning past the middle counts as a press); a footswitch is what they are made for.
  • The device shows where you are, and where you will be. On the Dwarf the footswitch of Current preset shows the name of the active preset (the first 7 characters) and its LED lights in the preset's colour. Next preset and Previous preset show the name of the preset they lead to, with that preset's colour on a dim LED. All of it follows the preset, the names and the cycle. A name that was never changed (Preset 3) is written Prst 3 there, to fit. Without widgets on the screen (stock firmware, the MOD Duo) the plugin works the same, only without the names and colours.

Choosing which presets the buttons go through

Seven presets may be more than a song needs. Turn off the Cycle cell of the presets you do not use (settings page, section 4) and the three buttons skip them: with presets 1, 2 and 5 in the cycle, Next preset goes 1 → 2 → 5 → 1 → ..., and Previous preset goes the other way through the same three.

Presets 3, 4, 6 and 7 are out of the cycle (✕): the buttons go through 1, 2 and 5
Presets 3, 4, 6 and 7 are out of the cycle (✕): the buttons go through 1, 2 and 5
  • The cycle always starts from the active preset. If a Preset N footswitch or a button of the plugin has just selected preset 5, the next press of Next preset goes to the preset after 5 in the cycle.
  • Presets out of the cycle can still be selected: the plugin buttons and the Preset 1–7 footswitches select any preset. Only the three buttons skip them.
  • With every preset in the cycle (the default), they go through all seven, also counting from the active preset.
06

The pop-up on the device screen

On devices with a screen that can show plugin pop-ups (MOD Dwarf), the name of the active preset is shown in a pop-up whenever the preset changes. As with Gossiper, the device only allows a pop-up on a page that has a control addressed to the plugin, so:

  1. Tap Assign on one of the four Notify tiles (Screen pop-ups, on the settings page) and pick a control of the device page where you want to see the pop-up (use a second, third or fourth one for other pages). They are the parameters Assign to notify 1–4, the names MOD UI lists.

    The Notify tiles of the settings page
    The Notify tiles of the settings page
  2. Every change of preset now shows the name of the preset on that page.

The LEDs and the names of the footswitches you assigned follow the preset as well, with the colour of each preset (section 5).

The pop-up needs a firmware with the HMI feature. Without it (older firmware, or a MOD Duo) the plugin works the same, only without the pop-up and the LEDs: the display of the plugin is your feedback. On the MOD Duo the Screen pop-ups tiles of the settings page are disabled, with a note that says why.

On the screen of the device

With the aLabs Starless image (Starless 19 or later) the MOD Dwarf and the MOD Duo X can show widgets of a plugin on their screens, drawn by the plugin itself. The stock MOD firmware does not have this: the plugin works the same there and simply shows nothing. On the MOD Duo there is no screen to draw on.

Hept7 Switch's widget on the MOD Dwarf (left) and on the MOD Duo X (right)
Hept7 Switch's widget on the MOD Dwarf (left) and on the MOD Duo X (right)

A widget is for looking, not for touching: nothing on the screen reacts to a finger or to a button of the device. What changes it are the controls you assigned to the plugin, as always; the widget follows them.

Placing the widget

  1. Open the Display dialog (the Device menu of MOD UI) and choose Active preset in the list of widgets of the pedalboard.
  2. Place it on an area of the screen: a column above a knob, two or three columns, a footer, both footers or the whole screen on the Dwarf; a knob, two knobs, the four knobs, the encoder band, a footer, both footers or the whole screen on each display of the Duo X. The dialog only offers the areas that are big enough for it.
  3. The dialog offers to assign Current preset to a footswitch of the device (a button that goes to the next preset in the cycle); choose the one you want, or leave it out if the preset is already chosen by other controls.
  4. Save. It can be placed on more than one area at once (a column and a footer, or one on each display of the Duo X).

It draws what fits in the area it gets: a footer shows the bare essentials, the whole screen shows everything.

Active preset

Shows which preset is on and what it switches, wherever the pedalboard is being played from: a footswitch, the settings page, a MIDI controller or a snapshot. It follows the preset, so it is also the way to see it when the LEDs are out of sight. It is offered in every area, from a footer up.

MOD Dwarf MOD Duo X What you see
Active preset on the MOD Dwarf: one footerOne footer · 51 × 10 Active preset on the MOD Duo X: one footerOne footer · 64 × 8 The number of the preset in an inverted box and its name.
Active preset on the MOD Dwarf: both footersBoth footers · 104 × 10 Active preset on the MOD Duo X: both footersBoth footers · 128 × 8 The same, and the 8 outputs at the right (filled: on in this preset).
Active preset on the MOD Dwarf: one columnOne column · 40 × 37 Active preset on the MOD Duo X: two knobs, one above the otherTwo knobs, one above the other · 64 × 30 Dwarf: the number, big; the outputs in two rows; the name; and one box for each of the 7 presets (the active one filled). Duo X: a cell with the number of each preset (the active one filled), the name big and the outputs.
Active preset on the MOD Dwarf: two columnsTwo columns · 82 × 37 Active preset on the MOD Duo X: the four knobsThe four knobs · 128 × 30 A cell with the number of each preset (the active one filled), the name big and the outputs.
Active preset on the MOD Dwarf: three columnsThree columns · 124 × 37 Active preset on the MOD Duo X: encoder band and knobsEncoder band and knobs · 128 × 47 A cell with the number of each preset (the active one filled), the name big and the outputs.
Active preset on the MOD Dwarf: whole screenWhole screen · 128 × 64 Active preset on the MOD Duo X: whole screenWhole screen · 128 × 64 All 7 presets in a list, each with its name and its outputs; the active one inverted. In the list an output that is on is a small square and one that is off a dot.
No area of this kind Active preset on the MOD Duo X: one knobOne knob · 64 × 16 The number of the preset in an inverted box and its name.
No area of this kind Active preset on the MOD Duo X: two knobs side by sideTwo knobs side by side · 128 × 16 The same, and the 8 outputs at the right.

The squares are the CV outputs of the active preset: a filled one is on (its DIP switch in the preset is up). In the lists a small square is an output that is on and a dot one that is off. The names are the ones you gave the presets, and the widget changes when you rename one.

The states of Active preset
The states of Active preset

The widget needs no Notify tile assigned: it is drawn where you place it, and stays there, unlike the pop-up, which goes away after a moment.

07

MIDI out

Besides its eight CV outputs, Hept7 Switch has a MIDI out jack (the ninth, under the second column of jacks). Each time the active preset changes, it sends one MIDI control change (CC) for every output: 127 when that output is on in the new preset and 0 when it is off. Use it to switch a MIDI-controlled pedal or a looper with the same scenes you set for the CV outputs.

  1. Connect the MIDI out jack to a MIDI input: the MIDI output of your device, a MIDI loopback port or a plugin that takes MIDI.
  2. Open the settings page and go to the MIDI out panel.

    The MIDI out panel: channel, changes only and the CC number of each output
    The MIDI out panel: channel, changes only and the CC number of each output
  3. Choose the channel (1 to 16) and the CC number of each output. They start at 20 to 27, numbers that have no standard meaning in MIDI. Tap the field to type a number, or use the buttons on its sides.

  4. Change presets as usual. The receiving device gets, for example, CC 20 = 127 and CC 21 = 0 when a preset turns output 1 on and output 2 off.

MIDI channel

VALUES
1 to 16
DEFAULT
1

CC for output 1 – 8

VALUES
0 to 127. One number for each CV output
DEFAULT
20 to 27 (output 1 is 20, output 8 is 27)

MIDI changes only

VALUES
Off / On
DEFAULT
On
USE
On: when the preset changes, only the outputs whose value differs from the last one sent are sent. Off: every output is sent on every change of preset. The plugin counts every output as "off" (0) until it sends something, so with this on the first change after the plugin is loaded sends only the outputs that are on.

When MIDI is sent

Only when the preset changes. Loading a pedalboard sends nothing, and flipping a cell of the active preset changes the CV outputs right away but sends no MIDI until the next change of preset.

08

Recipes

Each recipe shows the preset x output matrix as a grid: rows are presets and columns are CV outputs 1–8. A coloured square means the output is on (10 V) and a grey square means it is off (0 V). Each one is also a factory preset of the plugin (open Saved presets on the settings page).

12345678
Clean
Chorus
Crunch
Lead
Solo
Ambient
Kill

Seven-scene guitar rig

A complete rig on one pedal. The outputs are loops: 1 Compressor, 2 Overdrive, 3 Distortion, 4 Chorus, 5 Delay, 6 Reverb, 7 Boost and 8 Noise gate. Clean is the compressor with a touch of reverb, Chorus adds the chorus, Crunch and Lead use the overdrive (the lead adds delay and boost), Solo swaps it for the distortion with delay, reverb and boost, Ambient is a clean wash of chorus, delay and reverb, and Kill turns everything off between songs.

Assigning the Hept7 Switch: Out 1 → Compressor · Out 2 → Overdrive · Out 3 → Distortion · Out 4 → Chorus · Out 5 → Delay · Out 6 → Reverb · Out 7 → Boost · Out 8 → Noise gate

12345678
Preset 1
Preset 2
Preset 3
Preset 4
Preset 5
Preset 6
Preset 7

One-to-one selector

This is the factory setting. Each preset turns on exactly one output (output 8 stays off), so only one of up to seven plugins is active at a time. Use it to choose between amps, cabinets or reverbs placed in parallel, without ever having two of them on at once.

Assigning the Hept7 Switch: Out 1–7 → the bypass of each of the alternatives

12345678
Layer 1
Layer 2
Layer 3
Layer 4
Layer 5
Layer 6
Layer 7

Layer builder

Each preset adds one more layer to the previous one, so you move through the song from sparse to full: a pad, a shimmer, a harmony, a doubler, or anything with an on/off switch that you want to bring in step by step. Assign Next preset to one footswitch and Previous preset to another and you stack one more layer, or strip one, each time you let go of a footswitch.

Assigning the Hept7 Switch: Out 1 → base layer · Out 2 → second layer · ... · Out 7 → seventh layer

09

Tips

One output, many plugins

A CV output can feed any number of inputs. Assign one output to a delay and a reverb, and they become a single loop that always switches together. Eight outputs go a long way this way.

Leave always-on plugins alone

Your amp, cab, tuner or compressor don't need an assignment from Hept7 Switch. Save the eight outputs for the plugins you actually switch.

You do not have to use seven presets

Turn off the Cycle cell of the presets you leave unused, and Current preset, Next preset and Previous preset go only through the others. Give the unused ones the pattern of a preset you play, or all outputs off, in case a finger lands on them.

Keep a "nothing on" preset

Pressing the active preset again does nothing, so there is no toggle-off. If you want a dry reset, keep one preset with every output off (the Kill scene of the guitar rig).

Name your scenes

Click the name on the display and type what the scene does: Clean, Crunch, Solo. It is also the text of the pop-up on the device, so on stage you pick a scene by its sound, not by a number.

Colour-code your feet

The colours are fixed: red, yellow, green, cyan, blue, magenta and white, from preset 1 to 7, on the buttons and on the device LEDs. Assign the footswitches in the same order and your feet learn them.

Edit live

The squares of the display turn the outputs of the active preset on and off while you play, and the outputs follow immediately: a quick way to try a combination before you commit it on the settings page.

Combine with snapshots

Use snapshots for song-level changes, like tempo or amp voicing, and Hept7 for the scene changes inside the song. A snapshot also recalls which preset is active, so each song can start on the right scene.

Tweak sounds freely

Hept7 only stores which loops are on. Change your delay time or drive gain whenever you like, and every preset uses the new setting.

10

Questions & answers

I switch presets but nothing happens to my plugins.

The target plugins need a CV address. Open the addressing for each plugin's On/Off parameter, choose CV, and then select one of the Hept7 outputs. Also check that the active preset really has lit cells (settings page or display).

Why can't I turn a plugin on or off by hand anymore?

Once a parameter is controlled by CV, the CV signal decides its value, so you can no longer switch it directly in the web interface. If you need one plugin on its own, give it a dedicated output, or leave it out of Hept7 completely.

Why seven presets and eight outputs?

Seven is the number of colours the footswitch LEDs of the device have, so every preset gets a colour of its own. The number of outputs does not depend on the number of presets: each preset is any combination of the eight.

What is the difference from Tetr4 Switch?

Tetr4 Switch has 4 presets and 4 outputs and is smaller on the pedalboard. Hept7 has 7 presets, 8 outputs, a display that announces every change, a settings page with a matrix and the Cycle setting of the buttons that go through the presets. They are separate plugins and can share a pedalboard.

Can I use the B+C pair of footswitches?

Not for Current preset, Next preset and Previous preset: MOD UI only offers the pair for lists, and these are buttons (they are buttons on purpose, so the plugin can show the name and the colour on the footswitch itself). Put Previous preset on B and Next preset on C instead: two assignments, one footswitch each.

Why does the preset change when I let go of the footswitch?

Current preset, Next preset and Previous preset are momentary, off while held, so that the plugin has the last word on the LED and on the name after each change (the device redraws them when you press and again when you let go). If you change the assignment to another mode (toggle, or momentary on), keep in mind that only a release counts.

I set up the pop-up, but nothing appears.

The pop-up only appears while the control you assigned to a Notify tile (the parameter Assign to notify N) is visible on the device screen. Move it to the page you play from. On a MOD Duo there are no plugin pop-ups at all (its settings page shows those tiles disabled): use the display of the plugin.

Is it stereo? Does it add latency?

Neither question applies: Hept7 Switch has no audio ports. It only sends eight steady control voltages.

Can it send MIDI instead of CV?

Yes, in addition to CV. The MIDI out sends a control change for each output whenever the preset changes (see MIDI out). The MIDI output was first prototyped for Tetr4 Switch by a community member, stiv bennett.

11

Port reference

Port Type Description
CV Output 1–8 CV output 10 V while on in the active preset, 0 V otherwise.
Preset 1–7 Control input (toggle) Footswitch selectors.
Current preset Control input (toggle, momentary off) A button: each time it is released, goes to the next preset in the cycle (section 5).
Next preset Control input (toggle, momentary off) A button: goes to the next preset in the cycle when released.
Previous preset Control input (toggle, momentary off) A button: goes to the previous preset in the cycle when released.
Assign to notify 1–4 Control input Assign to a device page so the pop-up shows there. No audio or CV effect.
Preset N - Output M Control input (toggle) Dip switch: is CV output M on while preset N is active?
Preset N - In the cycle Control input (toggle) Is preset N one of the presets the buttons Current preset, Next preset and Previous preset go through? On by default.
Active preset Control output The active preset (0 is preset 1), whatever selected it. Used by the interface of the plugin.
CC for output 1–8 Control input (integer) The MIDI control change number sent for each CV output (0–127). Starts at 20–27.
MIDI channel Control input (integer) The channel of the control changes (1–16).
MIDI changes only Control input (toggle) Send only the control changes whose value changed. On by default.
MIDI out MIDI output The control changes, when the preset changes (section 7).
Preset label 1–7 Plugin property (patch) The name of each preset. Edited on the display or on the settings page.

Names use letters, digits, spaces and + - : _ .; anything else is replaced with _. They are saved with the pedalboard and with the plugin presets.

12

Specifications

Field Value
Plugin name Hept7 switch
Version 1.0.37 (the version of the plugin this manual is for)
Category Control Voltage · Utility
Format LV2 · URI http://srmourasilva.github.io/plugins/hept7-switch
Audio I/O None
CV outputs 8 × CV, 0 V (off) / 10 V (on)
MIDI MIDI out: a control change (channel 1–16) per output when the preset changes
Presets × outputs 7 × 8 (56 toggle switches)
Assignable parameters Preset 1–7 (toggle) · Current, Next and Previous preset (buttons) · Assign to notify 1–4 (toggle; the Notify tiles) · 56 dip switches · 7 Cycle switches · MIDI channel, CC 1–8 and changes only
Device feedback Footswitch LED colour + label, pop-up notifications (MOD HMI) · display on the plugin
Additional features Display widgets with the Starless HMI Widget Extensions (MOD Dwarf and Duo X)
Platforms MOD Dwarf · MOD Duo X · MOD Duo
Developer Paulo Mateus (SrMouraSilva)
License Apache-2.0
Source code github.com/SrMouraSilva/plugins-lv2
Store page Hept7 switch

Hept7 Switch is a community plugin. Feedback, bug reports and pull requests are welcome on GitHub.